Ranger 7600 Please HELP!!

[spiacro]

Hi, I have a Ranger 7600 System. I was needed to transfer the keyboard (Led keyboard - 8601) to another place. Unfortunately I disconnected it while the system was active. When i reconnected it the system didn't work as before. I have always "instant" on zone 2 and i have no alarm on zone 1  and zone 2 (I have only the keypad "beep" without siren). All the others zones works fine. I was trying to enter to "Go to program" menu with 9713 but nothing happened. Maybe the installers changed this. Does anybody knows how i can fix it? I think that it needs a factory reset.. but i don't know how without the "go to program" password. Please help me.

Spiros.

[fostiras]

Hi spiacro,
do a cold restart instead:
find a plug or switch that is supplying mains power to the panel and cut it off.
If you can not find any of the above unscrew the one of the two AC terminals paying attention it doesn't short to the other AC terminal.
Unplug the minus pole of the battery (black wire).

Wait for a minute

and plug everything back in the reverse order (battery first,AC second).

hope this helps

george

[spiacro]

Hi george,

thanks for your advice. I did everything that you told me but unfortunately the situation remains the same.   Have you any ideas for any installing software that supports 7600-3F board? I have already download from GE a software called DL900 and i was tried to connect via modem. But i think that the software DL900 doesn't support my board.. After the connection with modem i received an error.  Any other way to reset the board to factory defaults without password or any ideas to how can i retrieve the installing password? Thank you. Spiros.

e.g. R U from Greece?

[fostiras]

geia sou Spireto!!!
Yes I am Greek. And so is Kestri. Try to PM him he knows about the older Caddx series like the Ranger.From what I remember him saying you need the DOS version of the DL900 software.Still the download code needs to be the default one.The Ranger series isn't supported anymore. Ask Kestri (Hlias) and he will help you the best he can.
I hope you make it.

fililka
giwrgos

[spiacro]

Geia sou giorgo!
S eyxaristo gia tis plirofories. Epeidi eimai kainourgios edo sto forum kai den ksero pos akrivos doulevei, pos mporo na vro ton filo Ilia (kestri) Eyxaristo kai pali.

[fostiras]

Hi spyros,
vrhkes ton HLIA?

[kestri]

Hi George.

I spoke with Spiros. He reset the panel at GI security because he had allready aranged an apointment when i called him

Now everything works fine.

see u pal

[fostiras]

OK kestri,
thanx for the feedback!

george